EverFocus Flex1.0 Bedienungsanleitung PDF herunterladen (Seite 82)

EverFocus Navigation Access Control Management Software



These four buttons are page turning buttons. From the left to the right, these buttons

are Page One, the previous page, the next page and the last page.

Two “1” are the current page and the total pages.

is the running button, clicking means “confirm”.

 DVR list area

All DVRs that have been added will be displayed here.

5.1.1 Add a DVR

Click the “Add” button to enter into adding DVR page, as shown in the figure below:





DVR name: this can be defined by oneself, it is better to indicate the application and scope of

the DVR.

DVR model number: select the corresponding model number of the DVR to be added from the

pull-down box, the selection will limit the number of the definable cameras on the right side.

IP address: this is the IP address set on the DVR network to be added, that is, the address that

the DVR is accessed on the net.

Http port is often set by default. If ports above of the DVR to be added have been modified,

please refer to the DVR setting when adding.

The account corresponds to network password setup in DVR network setup. The authority

corresponding to account 1,2,3 is classified into three types: Admin, Play, Live. As to each

account’s authority attribute, please refer to DVR’s instructions, and add preciously.

For ease of indication, every camera of DVR can be named. The type of cameras can be

classified into PTZ and Normal (normal type), please select the corresponding one.

When all the items are selected, click “Save” button, system will display the prompt of

“successful operation”. Click the “Reset” button, all the information having been added to every

textbox will be reset. Click the “Return” button, the system will return to DVR setting page.

5.1.2 Edit the DVR

Select the bar to be edited in the DVR list, click the “Modify” button to enter into the DVR editing

page, as shown in the figure below:

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 139 140

Keine Kommentare

EverFocus Flex1.0 Bedienungsanleitung Seite 82