EverFocus Flex1.0 Bedienungsanleitung PDF herunterladen (Seite 71)

EverFocus Navigation Access Control Management Software

Card attributes:

A access group: required attribute. Only the card chooses the access group can it download the

controller which the access group has the authority. Cardholder can pass through the door under

this controller by swiping the card.

B card schedule: card schedule works only in Flex II controller and it is used in preference to

access group schedule (access group schedule have preference to door setting). Supposing

that card A is restricted to enter into door A in the access group plan, we should set card

schedule to this card. In card schedule, we set that this card can enter into door A, then card A is

permitted to pass door A after the modification of attributes.

Operating procedure:

1) Select the card format and input the corresponding card number. If it needs to add several

cards with consecutive numbers, please select add several cards and the amount, and

input the starting card number.

2) Input employee number or name, click “Search”，the name bar will show the name of the

person with the employee number, or the employee number bar will show the employee

number of the name.

3) Select card attributes such as free-access, arm valid, password state; input password and

duress password; select the period of validity of the card; select delegated authority group

and access group; if the card needs to set card schedule, please select card schedule

settings.

4) After selecting card attributes, Click “Confirm” button, then cards will be added to the card

list.

Initial card number: the code on the card is an eight-digit decimal number. If it is less than eight

digits, add 0 in the front.

ID card’s code format is Wiegand 26, that is, 26 digits. Except the first and the last digit that are

used for even-odd check, the remaining 24 digits are the real code of the card, when converting

to decimal system; it becomes the code of the card.

 The user can read the card number through the silk-screen on the card.

 By swiping the card on the card reader in online controllers, the user can read the card

number in illegal card-swiping records.

 Card number can be obtained by adding a card onto the system card recorder of the

controller and then downloading the card data of the controller.

As to cards whose numbers are progressively increasing, we can input starting card number and

the amount of card to add in batch.

4.3.1.2 Delete a card

On the card setting page, select the card to be deleted (one or more), click the “Delete” button,

then a dialogue box showing ”Are you sure to delete the selected card?” will pop up:

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 139 140

Keine Kommentare

EverFocus Flex1.0 Bedienungsanleitung Seite 71