EverFocus Flex1.0 Bedienungsanleitung PDF herunterladen (Seite 30)

EverFocus Navigation Access Control Management Software

User group: define the restricted level of the user to operate the software; different user group has

diversified software operation authorities.

! Note: the “user” is different from the “cardholder”. The user is, the software user, namely

the person monitoring or configuring the access control system through operating the

software, while the cardholder is the person using the access control system to pass

through the door (such as a employee of the company).

3.4.1 Add a user

Click the “Add” button in the user setting page to enter into the new user adding page:

Operating procedure:

1) Fill in the login name and the user name in the user information box.

2) Input the password and repeat it. The both inputs must be the same.

3) Select the user group for the new user.

4) Click the “Add” button.

!Note 1: the password and the repeated password must be the same, otherwise a dialog box

of “password discrepancy” will pop up.

!Note 2: the “user name” box can be blank, but the “login name” box must be filled since the

user may use it to log into the system. If the “login name” box is not filled, click “confirm”,

then the dialog box below will pop up:

After the user is successfully added, the dialog box of successful addition will pop up and the user

will be shown in the user list.

3.4.2 Edit a user

Select the user to be edited from the list, click the “Modify” button to enter into the edition page:

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 139 140

Keine Kommentare

EverFocus Flex1.0 Bedienungsanleitung Seite 30