EverFocus Flex1.0 Bedienungsanleitung PDF herunterladen (Seite 58)

EverFocus Navigation Access Control Management Software

Time zone: the time zone where the controller is.

Defence delay time: when the cardholder tries to enter into the door area, the system gives out

an alarm after a delayed period so that the cardholder can disarm the trouble, the delayed time is

called defence delay time. The text box on the right of the “defence delay time” allows the user to

change the defence delay time.

Alarm delay time: indicates the period of alarm lasting, applied to ELA82X and ELA85X series

controller, it is set in the alarm duration for FLEX series controller.

Valid defence area: indicates which defence areas are active (enabled) and which are inactive

(disabled). To select the item indicates the function enabled, otherwise disabled.

Date format: allow the user to change date format. Click radio button to change the date format.

YYYY-MM-DD: 2009-01-01 or MM-DD-YYYY: 01-01-2009

YYYY: represent the year

MM: represent the month

DD: represent the date

Alarm input 0 type: indicates the alarm triggering mode of alarm input 0 is normally ON or OFF.

Actions in case of a fire alarm: indicates which doors are opened and which are closed in case

if a fire alarm; to select it indicates the opening of the door, otherwise closing the door.

Time synchronous server: indicates whether it is a time synchronous server. When a controller

is set to be a time synchronous server, the controller can synchronize other controllers on line

485 based on its time.

Normal open free-access opening activation: when the door is opened by a free-access card,

the door keeps a normal state or keeps a normally open state.

Automatic daylight savings time: (not commonly used in Mainland China) allow the user to

activate or deactivate the automatic daylight savings time, select: “No”, represent the

cancelling of daylight savings time; “Yes”, represent the activation of automatic daylight savings

time, at this time further set daylight savings time.

Time section mode (for fingerprint machine only): to select opening indicates the use of

software to set time section mode, not to select this time indicates the use of the time section

mode of the fingerprint machine, the time section mode of the fingerprint machine can be set

after “opening” option box when this item is not selected.

Welcome: set the welcome displayed on the LCD in the operating state of the fingerprint

machine. This item is only for FLEX II single-door split device and FLEX II fingerprint machine.

Operating procedure:

1) Click other tab.

2) Modify the information of other settings in other information box.

3) Click the “Modify” button to change the related information of other settings.

4.1.6 Elevator setting (for elevator controller)

Elevator controller has an elevator setting option only. On the elevator setting page, the user can

set the name of the elevator floor location.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 139 140

Keine Kommentare

EverFocus Flex1.0 Bedienungsanleitung Seite 58