EverFocus EDR1620 Bedienerhandbuch PDF herunterladen (Seite 70)

¾ ALARM OUTPUT: This will transmit a signal to another device. The setting of

alarms are NONE = not activated, 1 = output signal 1 transmitted, 2 = output

signal 2 transmitted, 3 = output signal 3 transmitted and 4 = output signal 4

transmitted. To change this, simply use the Jog Dial on the DVR to make your

selection.

¾ ALARM DURATION: Buzzer noise and event record duration of an alarm,

from 1 sec to 99 seconds. The default value is 5 seconds.

¾ NETWORK ALARM:

YES: To enable network alarm.

NO: To disable network alarm.

¾ SEND EMAIL:

YES: Send an email when HDD is full.

NO: Will not send an email when HDD is full.

The email address can be set in the NETWORK SETUP MENU.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 147 148

Keine Kommentare

EverFocus EDR1620 Bedienerhandbuch Seite 70