EverFocus EDR1620 Bedienerhandbuch PDF herunterladen (Seite 41)

¾ LOG

YES: Select YES if you wish to record Motion Events in the Log.

NO: Select NO if you do not wish to record Motion Events in the Log.

¾ DURATION: The amount of time a motion event will record - from 1 sec to 99

seconds. The default value is 5 seconds. To change this, simply use the Jog Dial

on the DVR to make your selection.

¾ ALARM OUTPUT: This will transmit a signal to another device. The setting of

alarms are NONE = not activated, 1 = output signal 1 transmitted, 2 = output

signal 2 transmitted, 3 = output signal 3 transmitted and 4 = output signal 4

transmitted. To change this, simply use the Jog Dial on the DVR to make your

selection.

¾ ALARM EMAIL:

YES: Send an email when an alarm occurs.

NO: Do not send an email when an alarm occurs

The email address and e-mail server can be set in the NETWORK SETUP MENU.

¾ ALARM NETWORK:

YES: Enable alarm network when an alarm occurs.

NO: Disable alarm network when an alarm occurs

¾ BUZZER: Audible buzzer when motion is detected.

ENABLE: To enable a motion buzzer.

DISABLE: To disable a motion buzzer.

¾ MAIN MON: Display on a main monitor when an alarm occurs.

NO CHANGE: No change on the display in the main monitor when a motion

occurs.

FULLSCREEN: A full screen of the active camera will display when motion

occurs.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 147 148

Keine Kommentare

EverFocus EDR1620 Bedienerhandbuch Seite 41