EverFocus EDR1620 Bedienerhandbuch PDF herunterladen (Seite 110)

Use the prior step to assign an IP address. For example, if you got the IP address from

the computer of 192.168.002.101. Assign the DVR’s IP address as 192.168.002.050.

Now Copy the subnet mask and default gateway information you got from the prior

step off the computer to the DVR.

Note: Make sure the modem is in bridge mode. If your Internet Service Provider is

BellSouth you will have a modem/router. BellSouth provides a Westell modem that

includes a built-in router. You will need to disable the router functionality.

¾The next step is to open ports within your router. Open virtual ports in the router (Log

into the router using a PC)

o EDR Ports to open: 80, 1600, 37260, 37261, 37262, 37263

 Note: If your Internet service provider blocks port 80 you may use a different port

to access the DVR through the DVR’s Network Menu Setup.

 Note: If you wish to have multiple users log into the DVR please open a range for the

control and data ports on your router. For example if you would only like 4 clients to

connect to the DVR open 1600 and 37260 ~ 37263

¾If you have a Dynamic IP address and have open the ports simply go to Chapter 9 to

Configure DDNS.

¾Once you have reached this point and you have restarted the digital recorder.

¾To access the DVR from a computer simply open Internet Explorer and in the address

bar type:

http:// and the IP address of your internet service provider.

 Note: If your Internet service provider blocks port 80 you may use a different port

to access the DVR through the DVR’s Network Menu Setup.

101

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 147 148

Keine Kommentare

EverFocus EDR1620 Bedienerhandbuch Seite 110