EverFocus EDVR 9D1 Bedienungsanleitung PDF herunterladen (Seite 2)

DDNS Setup Instructions

Note: You MUST have firmware version 1.6.2 or higher in

order to use the EverFocus DDNS server.

1. Set up the DVR Network Menu according to the instructions detailed in

the Networking chapter of the DVR’s manual.

a. If using DHCP, all settings will be detected automatically.

b. If using Fixed IP, you will need to input the information manually.

In order for DDNS to work, you

must set the DNS Address (you

can obtain this from your Internet Service Provider).

2. If you are connecting through a router, make sure that you have opened

up the required network ports in the port forwarding section of your

router’s setup options. The default ports are 80, 1600, and 37260.

3. Go to the website

http://everfocusddns.com and check for an available

name.

4. In DVR’s Network Menu, go to DDNS. Choose “everfocusddns.com” for

the Server and put in your chosen name for DVR Name.

5. Press the Select button to synchronize the DVR with the DDNS server.

You should see the word “Success” at the bottom of the screen. If you

see “Could Not Find Server” instead, double check your network settings

until you get “Success”.

6. You should now be able to connect by typing in the host name you

created.

Example:

http://hostname.everfocusddns.com

1 2

Keine Kommentare

EverFocus EDVR 9D1 Bedienungsanleitung Seite 2