EverFocus EDVR 9D1 Bedienungsanleitung PDF herunterladen

If you’re already running firmware version 1.6.2 or higher skip to DDNS Setup

Upgrade Instructions for EverFocus

EDVR4D1/EDVR9D1/EDVR16D1/EDVR9D2/EDVR16D2/EDVR16D3 DVRs

Coping to your USB Flash Drive

You will first need to get a USB Flash Drive (Please DO NOT

use Sandisk Cruzer Micro). Insert

the USB Flash Drive to the PC’s USB port. Download the new version of the firmware from our

Service Bulletin page and copy to the USB Flash Drive. Once the file is copied to the USB Flash

Drive, insert the USB Flash Drive to the USB drive slot located in front of the DVR.

Back Up your Current Setting

Press stop then press Menu and go to the System menu by using the jog wheel and press enter.

Next to Load/Save Configuration change NO to YES by using the jog wheel. Highlight Save on

next prompted window (by using jog wheel) and press select to save your current setting on the

USB Flash drive.

Next to System Upgrade you will notice it say "Upload....” then “Success..."

Run the Update

Now, Press enter once to move the cursor to Update System software and change NO to YES by

using jog wheel. Highlight YES again on next prompted window (by using jog wheel) and press

select to run the update. Next to System Update you will notice it say "Phase 1/3.....” then “Phase

2/3.....” then “Phase 3/3.....” then “Success.....Please Reboot"

Reset to Factory Setting

Once the system successfully updates, the cursor will be on Load/Save Configuration, change

NO to YES by using the jog wheel. Highlight Default on next prompted window (by using jog

wheel) and press select to reset to factory setting.

Next to System Upgrade you will notice it say "Loading.....” then “Success....."

Press Menu twice to get out of the menu and reboot the system.

Load saved setting

Once DVR starts up press Menu and go to the System menu by using the jog wheel and press

enter.

Next to Load/Save Configuration change NO to YES by using the jog wheel. Highlight Load on

next prompted window (by using jog wheel) and press select to Load your saved setting from the

USB Flash drive.

Next to System Upgrade you will notice it say "Loading.....” then Success....."

Press Menu twice to get out of the menu and press record to start recording.

1 2

DDNS Setup Instructions 2

Inhaltsverzeichnis

Seite 1

If you’re already running firmware version 1.6.2 or higher skip to DDNS Setup Upgrade Instructions for EverFocus EDVR4D1/EDVR9D1/EDVR16D1/EDVR9D2/E

Seite 2 - DDNS Setup Instructions

DDNS Setup Instructions Note: You MUST have firmware version 1.6.2 or higher in order to use the EverFocus DDNS server. 1. Set up the DVR Network

Weitere Dokumente für Digitale Videorecorder (DVR) EverFocus EDVR 9D1

Um das Dokument anzuzeigen EverFocus EDVR 9D1 Bedienerhandbuch

EverFocus EDVR 9D1 Bedienerhandbuch (105 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

EverFocus EDVR 9D1 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Digitale Videorecorder (DVR) EverFocus EDVR 9D1 herunter. If you`re already running firmware version 1.6.2 or higher skip to Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Digitale Videorecorder (DVR) EverFocus EDVR 9D1

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Digitale Videorecorder (DVR) EverFocus EDVR 9D1