EverFocus ECOR 264-8/4 D2 Bedienungsanleitung PDF herunterladen (Seite 19)

1.10 NETWORK CONNECTION

This section only describes physical connection to an Ethernet network. This step must be completed

before the DVR can connect to the network. There are two basic types of connection:

1.10.1 Direct PC Connection through Crossover Network Cable

The point-to-point connection of DVR and PC requires a crossover (crossed) network cable. This type of

connection is ONLY used for direct connection to a single PC. Make sure that the PC is equipped with a

10/100 Mbps compatible network connection.

Figure 1-3 Direct PC Connection

Pinout of crossover-cable

1.10.2 Network Connection through Patch Cable

The connection to an existing network requires a normal patch cable (straight-through). The illustration

shows the connection to a network switch or router.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 123 124

Keine Kommentare

EverFocus ECOR 264-8/4 D2 Bedienungsanleitung Seite 19