EverFocus EBC890 Bedienungsanleitung PDF herunterladen (Seite 19)

1111

latches are in position. Then push down the controller a little bit to lock the position

(marked as 2 in step 2 figure).

Step 4: Lock the screw at bottom

Secure the controller to the base board by tiding the screws at bottom of controller

(exclusive screw driver is provided in the controller package).

Note: the screw has to be fastening to push down (secure) the tamper switch.

Step 1 Step 2

Step 3 Step 4

Fig. 6. Mount Fingerprint Controller

Connection to Door Lock

Electric strikes and magnetic locks are used to keep doors locked unless the system grants

access or the user sets the doors to remain unlocked. The installer must supply the electric

strikes and/or magnetic locks. It is recommended that the installer follow and keep the

instructions for these locks. One strike or mag lock is required for each door. These locks

Terminal

area

2-5: Latches

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 63 64

Keine Kommentare

EverFocus EBC890 Bedienungsanleitung Seite 19