EverFocus EBC890 Bedienungsanleitung PDF herunterladen (Seite 14)

Installation Overview

This chapter introduces the basic concept on how to install an access control system. The

experienced installer can jump to section “Determine Fingerprint Request” to get the

installation overview related to Flex fingerprint controller and other flex controllers.

The overall installation steps are shown in the following block diagram

Fig. 1. The detailed

descriptions are given in the subsection below.

Preparing for the Installation

Before beginning the installation, it is recommended that the user gather certain

information to better prepare. Proper preparation will help ensure a smooth installation,

and will save the installer time and reduce unnecessary efforts. The following information

is essential for a professional installation:

Obtain a Floor Plan

Obtain a floor plan of the building in which the access control system is to be installed.

Obtaining a floor plan helps the installer determine what components need to be installed,

and where. It also is essential in determining the length of cable needed to connect

readers to the controller. A floor plan can be a blue print of the building, a design, or

simply a drawing of the facility. Any document showing the footprint of the building can

be used. The dimensions are important to note, especially when determining cable lengths.

A floor plan may be obtained from your local city hall.

Determining Hardware and Location

Determining which hardware to use and where it will be installed. This is the most crucial step

in the preparation stage. First, determine how many access points, or doors, need to be

managed by the access control system. These access points will control the security of the

facility, and can limit the entry and exit to and from any given area of the building. After

deciding which doors need to be controlled, the user must also determine the level of security

needed at each door. There are many ways to manage each door, using different resources.

These resources include, but are not limited to: proximity readers, mag stripe readers, relays,

and request to exits. A few common door configurations are described below:

Chapter

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 63 64

Keine Kommentare

EverFocus EBC890 Bedienungsanleitung Seite 14