EverFocus ENVR8304E Bedienungsanleitung PDF herunterladen (Seite 86)

ENVR8304D-8CH / ENVR8304E-8CH

6.3 Event

You can configure the Alarm, Connection Loss, Motion and Other settings in this menu.

6.3.1 Alarm

Figure 6-23

Alarm: Select an Alarm input number from 1 to 2.

Enable: Check the box to enable the Alarm trigger function for the selected alarm input.

Log: Check the box to record alarm events to log data.

Pre-alarm Record: Check the box to start copying the recordings to the hard disk from 5

seconds before the alarm event occurs. Note that the pre-alarm recording rate will follow the

Normal Speed configured in the earlier section (see 6.1.2 Basic).

Buzzer: Check the box to enable the buzzer when an alarm event is triggered.

Email Notify: Check the box to send email notification with a snapshot file when an alarm

event is detected. Email operation requires valid email entered in the Email setup menu (see

6.6.2 Email).

Network Alarm: Check the box to send out a network alarm to a client PC when an alarm

event occurs. This feature works with EverFocus’ CMS software. You will need to configure

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 176 177

Keine Kommentare

EverFocus ENVR8304E Bedienungsanleitung Seite 86