EverFocus PowerVideo Plus Bedienungsanleitung PDF herunterladen (Seite 106)

EPHD04+ HDcctv DVR

By default, the RAID function is disabled. To enable RAID 0/1, follow the steps below:

1. Select RAID 0 or RAID 1, the following message appears. Click Yes to configure the RAID

settings. And the DVR will automatically reboot.

Figure 6-33

2. Enter the RAID menu again, the RAID 0 / 1 is enabled.

If you want to change the settings between RAID 0 and RAID 1, you have to check the Disable

option first to return to the default disk setting, and the message in Figure 6-33 will appear.

Click Yes for the DVR to reboot (return to the default disk setting). Go to the RAID menu again,

select RAID 0 or RAID 1, the message will appear again, click Yes for the DVR to configure the

disk setting to RAID 0 / 1.

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 145 146

Keine Kommentare

EverFocus PowerVideo Plus Bedienungsanleitung Seite 106