EverFocus EDR-1610A Spezifikationen PDF herunterladen (Seite 18)

EDR910_1610_ma_en_rev1 00 - 18 -

2.4 Speed dome installation

Speed dome or telemetry receiver pan/tilt/zoom control is available through web browser

or the optional PowerCon software if the DVR is connected to a network. Local telemetry

control is provided by the optional EKB 500 keyboard.

ATTENTION: The basic RS-485 wiring rules described in chapter 2.3.1. also apply to the

connection of speed domes or telemetry receivers.

Supported protocols: EverFocus, ED2200/2250, Pelco-D, Pelco-P

The optional RS-485 connection kit EDA 998 is recommended for easy installation.

For RS-485 port pin assignment, please refer to chapter 2.3.2.

Sample installation with 3 EPTZ1000 speed domes and EDA998

Sample installation with 3 EPTZ1000 speed dome, EDA998 and local EKB 500 operation

Required DVR settings:

RS-485 receiver address in CAMERA menu

RS-485 parameters and protocol in RS232/485 menu

ATTENTION: Some Pelco-D / -P protocol domes and receivers require an address offset

of -1, i.e. the address assigned to the dome / receiver in the DVR camera menu must be

1 below the address set in the dome / receiver itself!

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 82 83

Keine Kommentare

EverFocus EDR-1610A Spezifikationen Seite 18