EverFocus ECOR960 16F2 Bedienungsanleitung PDF herunterladen (Seite 107)

ECOR960 4F2 / 8F2 / 16F2

6.9 System Setting

You can configure the general settings for the DVR in this menu.

6.9.1 Date / Time

You can set up the date and time for the DVR.

Figure 6-36

Date: Click to bring up the on-screen keyboard to set up the date.

Time: Click to bring up the on-screen clock to set up the time.

Date Format: Select a date format from the drop-down list.

Time Format: Select a time format from the drop-down list.

Time Zone: Select a time zone for the DVR to adjust to when updating from the time server.

NTP: Select Disable / Enable for NTP time synchronization.

NTP Server: Displays the time server address that the DVR uses for time synchronization.

Requires operating network configuration and WAN or LAN access to a compatible NTP server.

To find a compatible NTP address, follow the steps below:

a. Use a computer connected to the Network.

b. Click Start > Run > type “command” and then click OK.

c. In the DOS Prompt, type “ping pool.ntp.org” to find out the IP address of an NTP

Server.

NTP Update Interval: The frequency that the system automatically updates the time via the

NTP server. Select Daily, Weekly or Monthly.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 148 149

Keine Kommentare

EverFocus ECOR960 16F2 Bedienungsanleitung Seite 107