Everfocus EZ630 Bedienungsanleitung

Installation / Operation Instructions EEZZ661100 LLooww LLiigghhtt IInnlliinnee IIPP6666 BBuulllleett CCaammeerraa EEZZ66

10 Weight 1250 g / 2.275 lbs. Mounting Pattern Speedy-Mount Ring mates with 4” round electrical box; base swivel is 1” NPT – remove base plate for

11 1.5 Camera Component Description 1) Reset: To load the factory default configuration press the button, which is inside this hole, for 3 s

12 1.6 Related Products In addition, you may order the following EverFocus products which are recommended for use with the camera to achieve the bes

13 2 INSTALLATION This chapter will describe, in general terms, how to install the EZ610/630 camera. STEPS: 1. Wire and mount the camera.

14 RS485 cable (optional) Video & Power cables Power Socket RS-485 cable Connect the power and video

15 2.2 Adjust Camera Position Adjust the viewing angle to the desired direction. With this unique 3-axis positioning system, installers can captur

16 Loosen this screw 3rd axis Sunshield To remove or install the sunshield, use the hexagon wrench provided to loosen the screw at sunshield.

17 Note: When properly installed, the rear of the sunshield is even with the rear of the camera body; improperly extending the sunshield to ‘shad

18 3 OSD MENU SETUP This chapter introduces how to change RS485 ID and Baud Rate and to configure the camera OSD menu. STEPS If you want to co

19 NOTE: For those selected items with “ ” sign in the end, there is a sub-menu for further settings. Return to Previous Page Go to “Return

2 E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N P/N: 4605XZ0610004AR Operation Instruction  2010 EverFocus Electronics Co

20 3.3 OSD Menu Setup 3.3.1 OSD Menu Tree Default settings are shown bold or in brackets. Lens DC Brightness 0~100 (50)

21 Motion Off On Area Select Area1-Area4 Area Display Off, On Left/Right 5~66 Width 0~93

22 3.3.3 EXPOSURE 3.3.3.1 SHUTTER 1. When the SETUP menu is displayed on the screen, please direct the arrow to point to “EXPOSURE” -> “SHUTTE

23 3.3.3.4 BLC-Backlight Compensation There are three choices for the type of BLC which may be employed: OFF, traditional BLC or HSBLC. BLC Video

24 TOP/BOTTOM Set the Top/Bottom side of an area for the HSBLC to be adjusted. The value adjustable is 0~6. HEIGHT Set the height of an area

25 MANUAL The manual adjustment mode enables a more precise adjustment. Please select ATW or AWC first. Then change to manual adjustment mode and p

26 EXT The picture will switch automatically to color in a normal environment and to B/W when the ambient illumination is low based on the illumina

27 3.3.7.2 D-EFFECT Offers a number of digital functions for processing the image. 3.3.7.3 FREEZE OFF Select “OFF” to view live image. ON S

28 3.3.7.6 GAMMA This menu allows adjustment of gamma correction for ideal linearity of image brightness and contrast in the range 0.05 to 1.0. 3.3

29 SELECT mode. AREA DISPLAY Select “ON” to use the area selected in the AREA SELECT. Select “OFF” to disable this function. LEFT/RIGHT Set the c

3 Precautions 1. Do not install the camera near electric or magnetic fields. Install the camera away from TV/radio transmitters, magnets, electric mo

30 3.3.8.3 RED Adjust image’s red level. The available range of level is 0~100. Press “RET” to saves all settings in the ADJUST menu and returns to

31 4 RS-485 REMOTE CONTROL 4.1 Remote control with EKB-500 keyboard 4.1.1 RS - 485 Wiring For more details about RS-485 wiring

32 d. Move the joystick RIGHT () and LEFT () to adjust the mode and parameters of the selected item. Press “Menu” to leave and goes to previous

33 EverFocus Electronics Corp. Headquarters Office 12F, No.79 Sec.1 Shin-Tai Wu Road, Hsi-Chi, Taipei, Taiwan Tel: +886-2-26982334 Fax: +886-2-26

4 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital dev

5 Table of Contents 1 Product Overview...

6 4 RS-485 Remote Control...

7 1 PRODUCT OVERVIEW Amazing color low light sensitivity of 0.05 lux before the added benefits of advanced DSP technology, delivered by a 1/3” So

8 • IP66 weather resistant • Dual voltage (12VDC/24VAC) with line lock to AC supply 1.2 Accessory Parts List Please be careful when you unpack t

9 1.3 Specifications Model EZ610 EZ630 Pickup Device 1/3" SONY Super HAD II CCD Video Format NTSC, PAL (by model) Picture Elements 768 x 494(