Everfocus ED610 Bedienungsanleitung

1/3” CCD Color Day/Night plus Wide Dynamic Range Outdoor Vandal Dome Camera Ope

- 9 - (1) External Light Sensor External Light sensor is used to detect the lighting level the environment. (The light sensor is “down” when the inte

- 10 - 2. INSTALLATION This chapter will describe, in general terms, how to install the ED610 camera. STEPS: 2.1. Mounting Camera: 1. Drill the

- 11 - 2.1.2 Mounting 1. Take off camera’s cover by rotating the cover counter clockwise. Loose outer cover ring

- 12 - 2. Pull the cables to be connected to the power and video cables from the ceiling or wall. 3. Fix the camera base to ceiling

- 13 - Wall Mount: 2.2 Adjusting Camera 2.2.1 Adjusting Camera Position Adjust the camera to best angle for viewing.

- 14 - 2.2.2 Adjusting Zoom and Focus It is highly recommended to use an EverFocus Test Monitor to set up the camera. Find the Video test connection o

- 15 - Step 2 Open the dome cover and place the Focus aiding lens cap on the lens, making sure that the cap’s notch is resting on the zoom knob.

- 16 - 2.2.3 Camera Setting 2.2.3.1 OSD User Setup Menu This camera utilizes an On Screen Display (OSD) user setup menu. Please refer to Chapter 3 O

- 17 - Turn the external ring 3. If the lens is not aligned with the window, loosen the outer cover, adjust the inner cover so that the

- 18 - 3. OSD MENU & CONFIGURATION This chapter introduces how to configure the camera OSD menu. 3.1 Access the user setup menu screen

- 1 - TABLE OF CONTENTS 1. PRODUCT OVERVIEW...

- 19 - 3.2 ED610 Menu Tree

- 20 -

- 21 -

- 22 - 3.3 LENS 1. When the SETUP menu is displayed on the screen, please direct the arrow to point to “LENS” by moving the joystick UP and DOWN.

- 23 - 3.4.4 BLC Video gain can be adjusted automatically to correct the exposure of subjects that are in front of a bright light sou

- 24 - 3.4.5 HSBLC HSBLC (Highlight Suppression BLC) is used to reduce the brightness of light sources in a specific area. It is activated only in a

- 25 - 3.5 WHITE BALANCE CONTROL The screen color can be adjusted by using the WHITE BALANCE function. 1. Please direct the arrow to point to “WHITE

- 26 -  COLOR: The picture is always displayed in color, even at low light levels.  AUTO: The picture switches to color in a normal (bright) e

- 27 - 6) If you would like to cancel the ID entered, please move the cursor to “CLR”, press in on the joystick, and all the letters entered will be

- 28 - ON:  D-Zoom: Select digital zoom from X1.0 up to X32. To control the portion of the magnified image in view (0 is the center of the image): 

- 2 - 3.4.2 AGC (Auto Gain Control)...

- 29 - 3.8.4 PRIVACY This mode covers the areas you do not want to see on the screen. OFF: Disable the PRIVACY function. ON:  AREA SELECT: Plea

- 30 - 3.9.2 BLUE Adjust image’s blue level. The available range of level is 0~100. 3.9.3 RED Adjust image’s red level. The available range of le

- 31 - EverFocus Electronics Corp. Headquarter Office 12F, No.79 Sec.1 Shin-Tai Wu Road, Hsi-Chi, Taipei, Taiwan Tel: +886-2-26982334 Fax: +886-2-2

- 3 - 1. PRODUCT OVERVIEW Amazing color low light sensitivity of .05 lux before the added benefits of digital signal processing technol

- 4 - Video Test Cable x 1 Power Adapter Cable x 1 Desiccant Pack x 1 Focus Aiding Lens Cap (for 9~22mm models only) x 1 Please Note:

- 5 - 1.3 Specifications Items Parameter Pickup Device 1/3" SONY Super HAD II CCD Video Format NTSC or PAL Scanning System NTSC:525 TVL, 6

- 6 - Ø 5.143mm//0.2” Ø 94.7mm/3.78” 1.4 Dimensions 123mm x 107.8mm ; 4.8” x 4.2”

- 7 - 1.5 Camera Component Description Exterior view Interior view Rotatable cover Outer Cover ring Base OSD joystick Power

- 8 - (1) 1.6 Front and Back Panel Layout Front Panel Layout: Back Panel Layout: (6) (4) (2) (5) (7) (3)