EverFocus EQ610x Bedienungsanleitung PDF herunterladen (Seite 8)

EQ610x

3 INSTALLATION

1. Unscrew the protection cap from the mouth of the lens mounting.

2. If a C-mount lens is to be used, please screw the C-mount adaptor ring (the

5mm-thick ring in the accessory pack) on to the mouth of the lens mounting.

3. Mount the lens by turning it clockwise on the lens mounting of the

camera.

4. If you use an Auto Iris lens, connect the lens’s cable to the Auto Iris

lens connector on the side of the camera.

5. Place an ND filter in front of the lens, adjust the lens focus until the

best image is obtained.

6. Lock the lens’s focus position by tightening the swivel screw, then

remove the ND filter.

Mount the lens

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Keine Kommentare

EverFocus EQ610x Bedienungsanleitung Seite 8