EverFocus EPTZ Series Bedienungsanleitung PDF herunterladen (Seite 18)

2-17

2. Thread the cable through the hole in the wall mount bracket, and screw in 4 M8 nuts

for mounting the bracket.

3. Take off the housing from the packing, and take off the PCB board (4 bolts on it.)

inside the housing. Thread the cable through the top of the housing. Fix the housing

on the wall mount bracket, and screw in 3 M5 bolts (Hex) on the top of the bracket

with the attached Hex Allen wrench to fix the housing.

RELAY

JP6

JP4

JP3 JP1

JP5

Video +

Video -

RS485 +

RS485 -

AC24

M5 Bolt

Hex Allen wrench

4. Connect the cable connectors to the nodes on the PCB board, and then fix the PCB

board in the housing by screwing 4 bolts on it.

Notice: Please notice the polarity of control line. The EPTZ1000 will not work if the polarity

of control line is mis-connected.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Keine Kommentare

EverFocus EPTZ Series Bedienungsanleitung Seite 18