EverFocus EPN4122 Bedienungsanleitung PDF herunterladen (Seite 91)

EPN4122/4122i/4220/4220i

 Upload to FTP: Click if you want the camera to upload the recordings to the FTP server

entered in the Set FTP Server field of the Network > SMTP/FTP page, if the Event occurs (see

7.3.3 SMTP / FTP).

Note: If the camera lost connection to the FTP server, the recordings will be automatically

uploaded to the SD card on the camera. Once the connection between FTP server and

camera has re-established, the camera will resume uploading recordings to the FTP server.

However, the recordings uploaded to the SD card during the disconnection period will not

be uploaded to the FTP server.

 Record to SD Card: Click if you want the camera to start recording its video feed (when the

event occurs) on an on-camera SD Card (if such a card has been inserted).

Note: The recording will only be as long as the combined Pre- and Post-trigger Buffers, so

make sure you enable at least one of these buffers, especially the Post-trigger Buffer.

 Record to PC: Check this box if you want the camera to start recording its video feed (when

the event occurs) on the same folder on the same PC as configured on the User Config >

Recording/Snapshot Export Settings (if such a folder has been enabled and configured).

Note: The recording will only be as long as the combined Pre- and Post-trigger Buffers (and

for as long as the event trigger is happening – e.g. a motion is detected), so make sure you

enable at least one of these buffers, especially the Post-trigger Buffer.

 Network Alarm: Check this box if you want the camera to send a network alarm signal (when

the event occurs) to the CMS servers configured on the Network > Network Alarm page (see

7.3.6 Network Alarm).

 Preset: Check this box and enter the corresponding number if you want the camera to go to

the Preset position indicated by the corresponding number, when the event occurs.

 Tour: Check this box and enter the corresponding number if you want the camera to start

the Tour indicated by the corresponding number, when the event occurs.

 Pattern: Check this box and enter the corresponding number if you want the camera to start

the Pattern indicated by the corresponding number, when the event occurs.

Note: Only one PTZ action (Preset, Tour or Pattern) can be selected per event.

Click Apply to apply the changes or Cancel to cancel the changes and return to the previous settings.

【Pre/Post Trigger Settings】

Pre-trigger Buffer: Select the duration for the buffer. This will determine the amount of footage

(length of time) before the event trigger moment that will be included in an event-triggered video

recording, if that buffer and video recording has been enabled in the Event Configuration Window.

Post-trigger Buffer: Select the duration for the buffer. This will determine the amount of footage

(length of time) after the event trigger moment that will be included in an event-triggered video

recording, if that buffer and video recording has been enabled in the Event Configuration Window.

Click Apply to apply the changes or Cancel to cancel the changes and return to the previous settings.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 109 110

Keine Kommentare

EverFocus EPN4122 Bedienungsanleitung Seite 91