EverFocus EPD200A Spezifikationen PDF herunterladen

EVERFOCUS

Indoor Pendent Dome Camera

Operation Instructions

Model No. EPD200

Please read this manual first for correct installation and operation. This manual should be retained

for future reference. The information in this manual was current when published. The

manufacturer reserves the right to revise and improve its products. All specifications are therefore

subject to change without notice.

PRECAUTIONS

1. Do not install the camera near electric or magnetic fields.

Install the camera away from TV, radio transmitter, magnet, electric motor, transformer,

audio speakers since the magnetic fields generate from above devices will distort the video

images.

2. Never disassemble the camera nor put impurities in it.

Disassembly or impurities may result in trouble or fire.

3. Never face the camera toward the sun.

Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit.

4. Keep the power cord away from water and liquid.

Touching the wet power cord may result in electric shock.

5. Never install the camera in areas exposed to water, oil or gas.

Water, oil or gas may result in failure, electric shock or fire.

1 2 3 4 5 6 7 8 9 10

Inhaltsverzeichnis

Seite 1 - EVERFOCUS

EVERFOCUS Indoor Pendent Dome Camera Operation Instructions Model No. EPD200 Please read this manual first for correct installation and ope

Seite 2 - OPTIONAL ACCESSORY

9EverFocus Electronics Corp. Head Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Hsi-Chih, Taipei, Taiwan TEL: +886-2-26982334 FAX: +886-2-26982380 www

Seite 3

16. Cleaning Do not touch the surface of sensor by hand directly. Use a soft cloth to remove the dirt from the camera body. Use lens tissue or a cott

Seite 4 - 110mm/4.33”

2SPECIFICATION Pickup Device 1/3" SONY Super HAD CCD Video Format NTSC or PAL Scanning System NTSC: 525 TV lines, 60 fields/sec. PAL: 625 TV l

Seite 5

3 DIMENSION DIAGRAM a. Conduit Size b. 26mm/1.06”125mm/4.92” 110mm/4.33” 90mm/3.54” 80mm/3.15””

Seite 6

4HARDWARE OVERVIEW a. Front panel design (For Vari-Focal Lens Model) b. Front panel design (For Fixed Lens Model)

Seite 7

5INSTALLATION This section covers simple steps and detail installation. Please follow instruction for preventing any unnecessary damage. Simple Ste

Seite 8 - CAMERA SETTING

6 2. Open Camera Bubble Cover Turn the camera bubble until you see the arrow face to here.

Seite 9

7 4. Adjust Camera Position and Lens a. Adjust camera position (Tilt angle up to 90 degree): Adjust camera to the position you like. The turning

Seite 10 - EverFocus Electronics Corp

8The default setting is ON. ¾ FL (Flickerless) When picture flicker fiercely, turn FL on, then the camera will stabilize the speed of electroni

Kommentare zu diesen Handbüchern

Keine Kommentare

EverFocus EPD200A Spezifikationen

Stöbern Sie online oder laden Sie Spezifikationen nach Sicherheitskameras EverFocus EPD200A herunter. EverFocus EPD200A surveillance camera Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitskameras EverFocus EPD200A