EverFocus EHN Series Installationsanleitung PDF herunterladen (Seite 5)

EZN Plus Series

b. If you want to wire the cables through the wall, feed the cables through the wall and

then screw the camera base to the Quick-Mounting Ring.

Camera Base Quick-Mounting Ring

Cables

5. Connect the network, power and other cables of the camera to the related devices. Please

refer to 2. 4-Pin Data Cable earlier in this Quick Installation Guide.

6. Optionally insert a micro SD / SDHC card into the card slot. Please refer to 3.2 Inserting a

Micro SD Card later in this Quick Installation Guide.

7. Access the camera live view. See 4. Accessing the Camera. Or connect a handheld test

monitor to the TV-out connector on the camera module for setting image zoom and focus.

Please refer to 3.3 Adjusting Camera Focus / Zoom later in this Quick Installation Guide.

8. Adjust the camera angles.

Pan Adjustment: Twist the Base Disk forcefully until it unscrews from the Lock Ring. Rotate

the camera 360° to the desired position and then screw the Lock Ring until it locks against

the Base Disk.

Base Disk

Lock Ring

360°

Tilt Adjustment: Loosen the Tilt Screw using the provided hexagon key and adjust the tilt

angle 90°.

90°

Tilt Screw

Rotational Adjustment: Loosen the Rotate Screws on both side of the camera body using

the providing hexagon key and rotate the camera 360° (180° to the left / 180° to the right).

180°

Rotate Screw

180°

1 2 3 4 5 6 7 8 9 10 11 12 13

Keine Kommentare

EverFocus EHN Series Installationsanleitung Seite 5