EverFocus EDN Series Bedienungsanleitung PDF herunterladen (Seite 56)

EDN2160/2260/2560

7.5.4 Media Mode

Users can select a media mode (System log / Snapshot / Recording / Message) for the camera to

send / upload / store to the configured place.

【System log】: Select this if you want to view the event-triggered system log information.

【Snapshot】: Select this if you want to view the event-triggered snapshots (7 snapshots at a time).

Snapshot prefix file name: Enter a name for the snapshot files. The maximum length is 20 digits.

Add date and time suffix to file name: Check the box if you want to add the date and time

information to the file name. Please check Add date and time suffix to file name box if you don’t

want to overwrite the snapshot files.

【Record】: Select this if you want to view the event-triggered recording files (about 7-second video).

Source: Select a source stream for the video clips. There are three options, Stream 1, Stream 2 and

Stream 3. You can configure the Stream 1 and Stream 2 settings in the Streaming setup (see 7.2.2

Streaming). The Stream 3 is fixed by the system, which is set up with H.264 and 640x480 resolution,

and cannot be configured.

Snapshot prefix file name: Enter a name for the snapshot files. The maximum length is 20 digits.

Add date and time suffix to file name: Check the box if you want to add the date and time

information to the file name. Please check Add date and time suffix to file name box if you don’t

want to overwrite the recording files.

Enable cyclic recording: Check the box for overwriting recording file when the storage capacity is

full.

【Message】: Select this if you want to view the event-triggered messages.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 72 73

Keine Kommentare

EverFocus EDN Series Bedienungsanleitung Seite 56