EverFocus EAN600 Technical Information PDF herunterladen (Seite 13)

- 13 -

The maximum number of cameras per DVR are listed on the left of the dialogue box.

If not all possible cameras are installed, the surplus cameras should be removed by

choosing DELETE.

If a camera is connected to the DVR after the initial DVR setup, or if a camera has been

deleted by mistake, choose ADD to add a new camera to the DVR.

Select an existing camera to change the settings.

Rename the chosen camera in the DESCRIPTION field.

The LOCATION field cannot be modified as the location is automatically pre-defined by

the DVR’s location.

In the AREA field, select the area in which the camera is installed from the pulldown

menu.

The CAMERA TYPE field is only available when single cameras are configured. When

linked to a DVR, the field cannot be modified, but automatically shows “DVR

connected”.

In the TYPE field, select whether this camera is a static camera or a camera with PTZ

function.

NOTE: It is important to activate PTZ at this stage of configuration, as otherwise the PTZ

control function will not be available during remote sessions!

The linked DVR’s description and IP address are displayed for information. Further

options are only available when single cameras are configured.

Finally, assign a camera number (1~16) to the active camera.

Having defined all cameras, select CLOSE to leave the camera configuration and return

to DVR setup.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 97 98

Keine Kommentare

EverFocus EAN600 Technical Information Seite 13