EverFocus EMV200 DVR Bedienungsanleitung PDF herunterladen (Seite 75)

 Note: If you have a dynamic IP address, you can set the DVR to DHCP to automatically detect the

network settings. Therefore, it can use a dynamic IP address.

 Exit from the DVR’s Menu to save the settings.

 To access the DVR from a computer, open Internet Explorer and in the address bar type:

http:// (IP address given by your internet service provider)

 Note: When using this type of connection, only one device can be connected to the modem at a time.

You will need to use a computer at a different location to test the connection.

5.9 Router or LAN Connection

Straight Through Ethernet Cable Pin outs:

The Figure below (next page) shows the pin configurations for a straight cable.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 101 102

Keine Kommentare

EverFocus EMV200 DVR Bedienungsanleitung Seite 75