EverFocus ECOR264-D2 guide Bedienungsanleitung PDF herunterladen (Seite 128)

120

Applications and Gaming allows you to set up public services on your network, such as web servers, ftp

servers, e-mail servers, or other specialized Internet applications. (Some Internet applications may not

require any forwarding) To forward a port, enter the information on each line for the criteria required.

Descriptions of each criterion are described here.

Application - In this field, enter the name you wish to give the application.

Start/End - Enter the starting number of the range under Start and the ending number under End.

Protocol - Enter the protocol used for this application, either TCP or UDP, or Both.

IP Address - For each application, enter the IP Address of the PC running the specific application.

Enable - Click the Enable checkbox to enable port forwarding for the relevant application.

When finished making changes, click the Save Settings button to apply your changes or Cancel

Changes to cancel them.

Here is an example for how the port information might look:

HTTP 80 to 80 Both 192.168.1.50 Enable

Where 192.168.1.50 is the IP address of the DVR on the LAN, and the default port 80 is in use.

Note: If you changed port 80 in the DVR’s Network Menu, open that port instead of 80.

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 139 140

Keine Kommentare

EverFocus ECOR264-D2 guide Bedienungsanleitung Seite 128