EverFocus ECOR264-D2 DVR Series Bedienungsanleitung PDF herunterladen (Seite 109)

101

 Log into the EverFocus DVR menu and go to the Network Setting Menu.

 Input the Static IP address, the Subnet Mask, and the Gateway that you obtained from the internet

service provider.

 Note: If you have a dynamic IP address, you can set the DVR to DHCP to automatically detect

the network settings. Therefore, it can use a dynamic IP address.

 Exit from the DVR’s Menu to save the settings.

 To access the DVR from a computer, open Internet Explorer and in the address bar type:

http:// (IP address given by your internet service provider)

 Note: When using this type of connection, only one device can be connected to the modem at

a time. You will need to use a computer at a different location to test the connection.

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 137 138

Keine Kommentare

EverFocus ECOR264-D2 DVR Series Bedienungsanleitung Seite 109