EverFocus EFC301 Bedienungsanleitung PDF herunterladen (Seite 25)

NAV Series TCP/IP Standalone Network Access Controller

protectionsetupadministrationsystem.Iftherecurrentlyisanalarminputorlatchedalarm

input,thesystemwillrequesttoresetthealarm.Thesystemwillprompttheusertopress

“#” to reset the alarm system,carryoutprotectionsetuporwithdrawal

operation,press“#”totogglebetween protection setup and protection

withdrawal and press “*” to exit and save the settings on exit. If carrying out protection

setup operation of the system, after exit, the system will enter protection setup delaying

state.



Under the protection setup operation mode, the yellow LED lamp on the casing of the

controllerwillindicatefourdifferentstates,seeTable4‐1:



Table4‐1StatesofIndicatorLamp



Yellow LED System Protection State

Off In protection withdrawal state

On In protection setup state

Slowly blink In protection setup delaying state

Rapidly blink In protection setup state, and alarm triggered.



4.3 Main Menu of System Setting

After entering the System Setting menu,  the numerical keys 2 and 8 have up and down

scrolling functions, respectively, the “*” key has the function of returning to the previous

menu or exiting the menu systemand the“#” key hasthe functionof confirming entry of

the currenthighlightmenu.The mainmenu ofthe System Settinghassix submenuitems.

After scrolling to the lastmenu item, continue rollingdownward, it will return to the first

menuitem.



System Armed

[#] To Disarm

System disarmed

[#] to Arm

Alarm Reset?

[#] To Reset

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 119 120

Keine Kommentare

EverFocus EFC301 Bedienungsanleitung Seite 25