EverFocus EA-LAN1 Bedienerhandbuch

Instruction Manual EEAA--LLAANN11 NNeettwwoorrkk AAddaapptteerr Volume 1 EverAccess

5) Now, set a temporary IP address for the server in the same network by clicking on “Tools” and selecting “Temporary change IP address”. 6) Type i

1) Click on “Mode” of the menu on the left side and choose the corresponding Port (Port1) 2) Choose the Port mode setting for “TCP realport” opt

5) Make sure the “Baud” rate is 9600, the “data” is 8, the “stop” bit is 1, the “Parity” is “n”, the “Flowctrl” is “none”. For the “Type”, choose

Connecting the EA-LAN1 to the controller The EA-LAN1 has three inputs: Power, Ethernet connection (RJ45) and a serial communication (DB9) connectio

13) The EA-LAN1 pin definition for an RS232 corresponding pin is below. DB9 PIN # RS232 RS485-Half RS485-Full RS422 1 DCD N/A N/A RTS- 2 RXD DA

4 DTR Output Data terminal ready 5 GND ---- Signal ground wire 6 DSR Input Data equipment ready 7 RTS Output Request for sending 8 CTS Inp

• How to Map the COM Ports over TCP/IP How to Install COM Port over TCP/IP Driver 1) Run 60x_2k_4.1 .1 in CD-ROM. 2) Click “Yes” to begin the i

5) Then click “Install” 6) Then click “Finish” to complete the installation.

7) Now the driver is installed in your PC. How to Map the COM Ports over TCP/IP 1) Click “Start” on your desktop and choose “Control Panel”. D

a) COM port: is the COM port resource that WINDOWS uses. b) Device IP address: is the IP address of server. c) Device Port: is the number of seri

EVERFOCUS ELECTRONICS CORPORATION EA-LAN1 Instruction Guide © 2004 Everfocus Electronics Corp 2445 Huntington Drive Phone 626.844.8888 • Fax 626.844.

Notes:

Head Office European Office 12F, No.79 Sec.1 Shin-Tai Wu Road,

Read This First It is extremely important that you read this guide to get started with your EverAccess product. Unpacking Please be careful when you u

parts that could result in a fire or electric shock. Never spill liquid of any kind on the unit. • Service: Do not attempt to service this unit by yo

Contents CHAPTER 1 Product Overview...

1 Product Overview The EverAccess EA-LAN1 Network Adapter is a serial to TCP/IP adapter that enables users to manage the EverAccess Flex Series contro

EVERFOCUS ELECTRONICS CORPORATION 2 • Set the rights of different levels according to the user, IP address and MAC address • Provides real COM driv

Installation Overview The EA-LAN1 provides convenient remote management of the controller over the internet or local area network. There are a few

Locating the EA-LAN1 and Changing the IP Address 1) Run the upgrade.exe software from the CD included with the EA-LAN1. 2) If the server is conne