EverFocus EMV800 Bedienungsanleitung PDF herunterladen (Seite 97)

4.8.6 SERVICE

Figure 4-49 System-Service.

Firmware

Current Firmware Version: Displays the current version.

Upgrade from USB: Press “Upgrade” to upgrade the firmware.

NOTE: To perform a Firmware Upgrade, you will need to connect a USB flash device with

the desired firmware. Do not disconnect the USB device or turn off the power to the

unit during the upgrade; this can cause the system to fail to recover, requiring factory

service to repair.

Configurations

Load Factory Default: Click “Load” to restore all menu settings to the default values. User Account,

Network IP Settings, and Time are not affected.

Load From USB: Click “Load” to upload saved DVR configuration settings from a USB flash device.

Save To USB: Click “’Save” to save the current DVR configuration settings to a USB flash device.

Allowed Remote Reboot: Check the box to enable remote reboot from remote web page.

Click

button to return to the previous level of menu.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 136 137

Keine Kommentare

EverFocus EMV800 Bedienungsanleitung Seite 97