EverFocus EDSR100H Bedienerhandbuch Seite 1

EDSR100INSTRUCTION MANUALDigital Single Channel RecorderAbout this manualBefore installing and using this unit, please read this Manual carefully.Be s

Specifications20℃~+50℃Operating Temperature430mm (L) x 88mm (W) x 300mm (H) DimensionAC90~265V Power Source9-pin female connector RS-232Yes Watch

1354276 8910 11 121314151617181920Front Panel KeypadsHDD : HDD Access, the LED will be lit when HDD is accessed.LAN : LAN Access, the LED will be lit

MENU : Press this key to enter Setup menu.ENTER : Press this key to confirm the selection or data changed.1314Remote Control15Jog and Shuttle DialShut

20Compact Flash Card Slot: Insert a Compact Flash Card here.Hard Disk Tray: Hard Disk holder for HDD.2002/04/2412:00:00RECORD. 002 HRIn Record

Back Panel ConnectionsAudio IN 1, 2 : Audio input for recording. Audio OUT 1, 2 : These two audio outputs can be set to “Enable” or “Disable” in Setup

S -VIDEO IN: The S -VIDEO input connector.VIDEO IN: The composite video input connector.VIDEO Input to be RecordedVIDEO OutputS -VIDEO OUT : The S -VI

LAN Connector : The RJ-45 LAN connector.LANALM-NC : Normal Close Alarm output. In normal condition, this terminal isshorted to the terminal of ALM-

4.1 One Camera Connection. (1 ) :Video or S -VIDEO out: The video input setting should be set as COMPOSITE. (SYSTEM SETTING MENU)When the camera o

(1): Multiplexer VCR Out : This connects to the VIDEO IN connector at the rear panel.(2) :Multiplexer VCR In : This connects to the VIDEO OUT 1 connec

4.3 Quad Connection. ( Quad with VCR in VCR out connector) Main MonitorQuad(1): Quad VCR Out: This connects to the VIDEO INPUT connector at the rear

4.4 Quad connection. ( Quad without VCR in VCR out connector) Main Monitor(1): Quad Video Out ( to Video Recorder): This connects to the VIDEO INPUT

INSTALLATION13(1) Insert a HDD (IDE) for Video Storage The HDD should be set as MASTER.( Normally the default setting of HDD is Master)Notice: Aft

MENU6. MENU FLOWTIMER-SET 2 SETTING MENU( See page 16 )TIMER-SET 1 SETTING MENU( See page 16 )CLOCK/LANGUAGE SETTING MENU( See page 15 )Turn the Shutt

MENU15In CLOCK/LANGUAGE SETTING MENU , we SET(1) DATE : Current dateYear: 2000 ~ 2099 Month: 01~ 12 Date: 01~31(2) TIME : Current tim

MENU16TIMER-SET 1 SETTING MENUWEEK SUN MON TUE WED TIMER-SET 2 SETTING MENUWEEK TUE FRI SAT DLY START STOP SPEED

The monitored image can be recorded automatically by setting the start and endtimes in TIMER SET SETTING MENU, we can set the schedule to record for a

MENU18NORMAL RECORD SETTING MENUSPEED QUALITY MULTIPLEXER RECORD MODE DISK FULL

(3) MULTIPLEXER:ON/OFF : The user can select Multiplexer connection or One Camera connectionON : The video input from MUX MAIN MONITOR connector at t

In ALARM RECORDING MENU, we define (1) ALARM OPERATION :ON : Records when alarm occurs. OFF : Does not record when alarm occurs.(2) RECORDING SPEED :

(4) ALARM –IN TYPE : N.O. : Normal Open, N.C. : Normal Close(5) ALARM - RESET TYPE:N.O. : Normal Open, N.C. : Normal Close(6) ALARM DURATION TIME :

BUZZER SETTING MENUBUZZER ALARM –IN RECORD -IN DISK FULL VIDEO LOSS TIMER In BUZZER SETTING MENU, we SET the buzzer O

MENUARCHIVE SETTING MENU PICTURE SIZETIME STAMPTIME STAMP POSWATER MARKWATER MARK POS 720x480ONBOTTOMONBOTTOM:::::6.6 ARCHIVE SETTING M

6.7 NETWORK SETTING MENUNETWORK SETTING MENU IP ADDRESSNET MASK ADDRESSGATEWAY ADDRESSUSER-MAME PASSWORD LEVEL

MENU(1) PASSWORD ENABLE :YES/NO : User can set the PASSWORD ON or OFF to enter the system setting menu.YES: Selects the PASSWORD to enter the system

(3) VIDEO INPUT :COMPOSITE : Selects the video input from the BNC connector.S-VIDEO : Selects the S-VIDEO from S-VIDEO connector.1 2 3 4

(6) FIELD CODE LINE : When the system is connected to the Multiplexer, it is used to adjust the field code of the Multiplexer.The values: 00~20 The

7.1 INSTANT RECORDINGWhen pressed, the pictures being monitored will be recorded in the HDD. •The recording rate and recording quality are set in the

Press MENU key and turn the jog dial to select the ALARM RECORDING SETTING MENU.The monitor image will automatically record when alarm occurs and stop

8.1 NORMAL PLAYBACKPress the PLAY key to start playing back the stored image/audio from the last SEGMENT. (1) PlaybackPress the REV.PLAY key to start

Playing Back(5) Frame/Field advance Forward/ReversePress PAUSE key to freeze the picture.Turn the jog dial clockwise to advance the still image Frame/

WARNINGTO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.CAUTIONDO NOT REMOVE COVER. NO USER SERVICEABLE PAR

8.2 SEARCH PLAYBACK(1) Segment Search PlaybackPress the SEARCH key to enter the Search menu.SEARCH MENUBY SEGMENT LISTBY ALARM LISTBY DATA

Playing Back(2) Alarm Search PlaybackPress SEARCH key to enter the Search menu.Press the keys to move the cursor to BY ALARM LIST a

Playing Back(3) Date/Time Search PlaybackPress SEARCH key to enter the Search menu.Press the keys to move the cursor to BY DATE/TIME

COPYInsert a Compact Flash card into the Compact Flash slot on the front panel.When inserting the Compact Flash card, make sure that the direction of

COPYPress COPY key and then the copy menu appears.COPY36Press the PLAY key to start playing back.PLAYPLAYPress PLAY key to continue Copy Movie File.

COPY37Press the PAUSE key to stop continue copy.PAUSEPress STOP key to end play.STOPNotice: Copied images are stored as a movie picture.Copied files a

Interface SpecificationsRS23210.1 Transmission settingThe transmission setting is 9600 baud rate, 8 data bits, 1 start bit, 1stop bit and no parity.

10.2 Remote Control ProtocolA computer or a terminal can be used to control the unit by sending three character ASCII commands through RS232 connector

Remote ControllerThe remote controller is an accessory to enhance the handy operations of EDSR100 (Figure 1). You can do all the settings and operat

Appendix-A 12.1 When Recording with an 80-GB HDD41Lower Low Basic StandardHighSuperior: 15 kB: 20 kB: 25 kB: 30 kB: 35 kB: 40 kB(Estimated with typ

 Refer all work related to the installation of this product to qualified service personnel or system installers. Do not block the ventilation openin

12.2 When Recording with a 160-GB HDD Lower Low Basic StandardHighSuperior: 15 kB: 20 kB: 25 kB: 30 kB: 35 kB: 40 kBAppendix-A 42(Estimated with t

Appendix-B 13. APPENDIX-B/SECURITY LOCK SETTINGPress STOP key, the system will ask for the password. If you enter a correct password, the locked keys

14. APPENDIX-C/View From Internet/Intranet(1) Basic Operations & Login Display:Go to the Internet Explorer, key in the network IP, for example,htt

(2) Main Screen12345678 910111213The above diagram is the main screen display. The icons on the lower corner of the screen are mainly for control an

7C Control Mode: This key will switch user to direct remote control mode.Note: Control Mode which only allow use with access level “Super” user

10The system allows up to 3 types to select for play video by segment, alarm list and date time.(play video to select by segment list)(play video to

111213Use the mouse to show all the picture lists.Use the mouse to play the video.Present situation of system and time in military hour format.48Appen

EverFocus Electronics Corp.Head Office:12F, No.79 Sec. 1 Shin-Tai Wu Road,Hsi-Chi, Taipei, TaiwanTEL : 886-2-26982334FAX : 886-2-26982380USA Office:24

The exclamation point within an equilateral triangle is intended to alert the user to presence of important operating and maintenance(servicing)instru

Important SafeguardsRead Instruction---All the safety and operating instructions should be read before the init is operatedRetain Instructions---The s

Table of Contents1. Product Overview……….…...……………………………………………………………………………………..………….. 11.1 Feature………...…….…….….…………………………………….…………..…………………………………………….

1. Product OverviewThe EDSR100 is the first true VCR replacement designed particularly for the security industry, seamlessly combining high-resolutio