EverFocus ECMD200 Spezifikationen PDF herunterladen

Covert Color Camera in

Working PIR Motion Detector Case

Operation Instructions

Model No. ECMD200

Please read this manual first for correct installation and operation. This manual should be retained for future

reference. The information in this manual was current when published. The manufacturer reserves the right

to revise and improve its products. All specifications are therefore subject to change without notice.

PRECAUTIONS

1. Do not install the camera near electric or magnetic fields.

Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio

speakers since the electromagnetic fields generated from these devices may distort the video image or

otherwise interfere with camera operation.

2. Never disassemble the camera beyond the recommendations in this manual nor introduce

materials other than those recommended herein. Improper disassembly or introduction of

corrosive materials may result in equipment failure or other damage.

3. Try to avoid facing the camera toward the sun.

In some circumstances, direct sunlight may cause permanent damage to the sensor and/or internal

circuits, as well as creating unbalanced illumination beyond the capability of the camera to

compensate.

4. Keep the power cord away from water and other liquids and never touch the power cord with

wet hands. Touching a wet power cord with your hands or touching the power cord with wet hands

may result in electric shock.

5. Never install the camera in areas exposed to oil, gas or solvents.

Oil, gas or solvents may result in equipment failure, electric shock or, in extreme cases, fire.

1 2 3 4 5 6 7 8 9 10

Inhaltsverzeichnis

Seite 1

Covert Color Camera in Working PIR Motion Detector Case Operation Instructions Model No. ECMD200 Please read this manual first fo

Seite 2 - OVERVIEW

9 EverFocus Electronics Corp. EverFocus Taiwan: 12F, No.79, Sec. 1, Shin-Tai Wu Road, Hsi-Chih, Taipei, Taiwan TEL: +886 2 2698 2334 FAX: +886 2 269

Seite 3 - PACKAGE CONTENTS

1 6. Cleaning For cameras with interchangeable lenses, do not touch the surface of the sensor directly with the hands. Use lens tissue or a cotton

Seite 4

2 FEATURES Camera:  Color camera with SONY 1/3” Super HAD II CCD sensor  Employs Digital Signal Processor (DSP) chip-set for high quality images

Seite 5 - SPECIFICATIONS

3 DIMENSIONS

Seite 6 - INSTALLATION

4 SPECIFICATIONS Camera Model ECMD200 Image Pick-up Device SONY 1/3’’ Super HAD II Color CCD Effective Picture Elements NTSC: 768*494 Horizon

Seite 7

5 INSTALLATION Warning: To prevent electrical shock, turn off the electrical power before making electrical connections. 1. Locate the desired

Seite 8 - MIN MAX

6 4. If not using the bracket provided (not recommended), attach the PIR detector back cover to the mounting surface with the screws provided (Do n

Seite 9 - N.C N.O -- +

7 PIR DETECTOR CONFIGURATION 1. LED Selector:

Seite 10 - EverFocus Electronics Corp

8 5. Pulse Control: Once or twice PULSE 1 2 4 PINS 2 PAIRS

Kommentare zu diesen Handbüchern

Keine Kommentare

EverFocus ECMD200 Spezifikationen

Stöbern Sie online oder laden Sie Spezifikationen nach Brückenkameras EverFocus ECMD200 herunter. EverFocus ECMD200 Specifications Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Brückenkameras EverFocus ECMD200