EverFocus EQ610s Bedienungsanleitung

EQ610s Indoor Box Camera 700TVL, True Day/Night, Super Low-Light, D-WDR User’s Manual V2.1 * Len

EQ610s 8 5.2 OSD Operation 1. Open the OSD menu Press the ENTER button to open the OSD’s main menu on your screen. 2. Scroll with the cu

EQ610s 9 6. Configuration with the OSD 6.1 LENS Once you have opened the OSD’s main menu on your screen, use the UP and DOWN buttons to scrol

EQ610s 10 MODE There are two modes to select from: AUTO IRIS and SHUT+AUTO IRIS. To change the mode, highlight the MODE field and press the LEFT an

EQ610s 11 6.3 WDR 1. When the main menu is displayed on the screen, use the UP and DOWN buttons to scroll to the “WDR” menu item. 2.

EQ610s 12 BLC (Back Light Compensation) On the main menu, scroll to WDR and select BLC mode in the right-hand column. Even when there is a bright

EQ610s 13 ATW (Auto Trace White Balance) This mode can be used to view areas with a color temperature range of 1800°K to 10500°K (e.g., around fluo

EQ610s 14 6.5 2DNR & 3DNR (Digital Noise Reduction) • Camera performance improves when digital “video noise” levels are reduced. W

EQ610s 15 • D/N IN mode must be selected if the camera receives its Day/Night mode-change signal from an external device that is attached to the

EQ610s 16 • BURST : Turn the BURST function off to reduce the color noise when the camera switches to B&W mode. If the camera cannot switch bac

EQ610s 17 HUE Level: -050~050. Adjusts the value of the hue. MIRROR This setting lets you rotate the camera view on your screen. Options are N

i CAUTIONS 1. Do not install the camera near electric or magnetic fields. 2. Never disassemble the camera beyond the recommendations in this man

EQ610s 18 - DETECT SENSE The higher the number, the more sensitive the camera’s motion detector will be. - BLOCK DISP Block Display displays smal

EQ610s 19 - AREA SEL Up to 15 areas can be masked. Use your LEFT and RIGHT buttons to select the number of the mask you want to switch on/off or e

EQ610s 20 E-ZOOM This function is only active if the DIS function is switched off. Select ON and press the ENTER button to do further setups. Th

EQ610s 21 COMM - CAMERA ID Select the camera’s ID number. - DISP CAM ID Switch this OFF if you don’t want to display the camera’s ID on the dis

EverFocus Electronics Corp. EverFocus Taiwan: 12F, No.79, Sec. 1, Shin-Tai Wu Road, Hsi-Chih, Taipei, Taiwan TEL: +886 2 2698 2334

EQ610s 1 1. INTRODUCTION The EverFocus Polestar III-series EQ610s box camera features an incredible 700TVL resolution in full col

EQ610s 2 1.3 SPECIFICATIONS Pickup Device 1/3" Sony 960H EXview HAD CCD II Video Format NTSC PAL Picture Elements (H x V) 1020 x 508 1020 x

EQ610s 3 2. CAMERA OVERVIEW 2.1 NAMES AND FUNCTIONS OF PARTS 2.1.1 FRONT PANEL 2.1.2 BRACKET POSITIONS The bracket in the package can be

EQ610s 4 2.1.3 BACK PANEL GNDD/N OutD/N InMotionRS485-RS485+2345678LINE IN1GNDD/N OutD/N InMotionRS485-RS485+2345678AC 24V / DC 12V1+ -1

EQ610s 5 6) Down-scroll button 7) Video Output Connector BNC connector that connects to a 75 Ohm coaxial cable to feed the video output of the came

EQ610s 6 4. CONNECTIONS 1. Connect the cable from the keyboard’s RS485 port to the camera’s two corresponding RS485 terminal block connectors

EQ610s 7 5. CAMERA SETUP OPERATIONS This camera utilizes an On Screen Display (OSD) user setup menu. 5.1 SETUP BUTTONS To set items on the u