EverFocus EQ550 Spezifikationen

EVERFOCUS 1/3” Super High Resolution 560 TVL Day/Night Dynamic Noise Reduction Camera Operation Instructions Model No. EQ550 Please read this manual

- 9 - 5. CAMERA SETUP OPERATIONS This camera utilizes an On Screen Display (OSD) user setup menu. 5.1 Setup Buttons To set items on the user setup me

- 10 - 5.2 Display/Close the user setup menu screen I. Press the SET button The menu screen will appear on the monitor as the block sho

- 11 - 6. USER SETUP 6.1 LENS 1. When the SETUP menu is displayed on the screen, please direct the arrow to point to “LENS” by using the UP and DO

- 12 - Ö ESC: The shutter speed can automatically be controlled. When ESC mode turns on, the auto control of the shutter speed can be perfo

- 13 - 6.3 WHITE BALANCE control The screen color can be adjusted by using the WHITE BALANCE function. 1. Please direct the arrow to point to “WHITE

- 14 - 6.4 BACKLIGHT Even there is a massive backlight behind the object, bright images of the background and the object can still be obtained by u

- 15 - 6.6 DNR (Dynamic Noise Reduction) Dynamic Noise Reduction in video images has the following effects. 1. Images are brighter and sharper. 2.

- 16 - Ö OFF: The function is disabled. 3. Press the SETUP button when you finish all the settings. 6.8 SPECIAL 1.

- 17 - 6.8.1 CAMERA ID Input the camera ID, and it will be appeared on the monitor. 1) Please direct the arrow to point to “CAMERA” by using

- 18 - 6.8.2 COLOR ADJ Adjust the Color Gain from 0 ~ 15 6.8.3 SYNC There are two SYNCHRONIZATION modes: INTERNAL and EXTERNAL LINE-LOCK. In

- 1 - TABLE OF CONTENTS 1. PRODUCT OVERVIEW ...

- 19 - z Please select the area you would like to detect from the 4 areas in AREA SEL mode. z Please select ON mode for the chosen area.

- 20 - 2. Increase DOWN scale value by 20. AREA1 position after change is: TOP: 10, DOWN: 45, LEFT: 20 and RIGHT: 40. 3. Increase TOP scale v

- 21 - 6.8.5 PRIVACY This mode covers the areas you do not want to see on the screen. 1) Please direct the arrow to point to “PRIVACY” by using the

- 22 - 1. The original position of AREA1 was TOP: 10, DOWN: 25, LEFT: 20 and RIGHT: 40. 2. Increase DOWN scale value by 20. AREA1 position

- 23 - 5. Increase LEFT scale value by 20. AREA1 position after change is: TOP: 30, DOWN: 45, LEFT: 40 and RIGHT: 60. z In order to save the

- 24 - 6.8.8 RESET Reset to the default level. 6.8.9 RETURN It saves all settings in SPECIAL menu and returns to the SETUP menu.

- 25 - 7. POLESTAR WITH RS485 MINI DIN 7.1 RS485 Communication & Control PIN PIN definition: 1. TXD (RS485 +) 2. RXD (RS485-) 3. Motion d

- 26 - 7.2 Key Features with RS485 1. Polestar can be controlled through RS485 by keyboard. 2. Polestar recognizes EVF-1, EVF-2, Pelco-D and Plus-D

- 27 - 7.4 Control by keyboard 1. Press Menu key to enter setup menu. If the item has its own setting menu (sign ), press this button

- 28 - 7.6 Day/Night control by external D/N signal Please set D/N limit switch to position OFF, so that the camera can receive external Day/N

- 2 - 9. CONTENT LIST ...

- 29 - 7.8 Alarm output for motion detected First, please set Motion detection ON in Setup Menu (Special -> Motion Det -> ON). When a mo

- 30 - 8. SPECIFICATIONS Pickup Device 1/3'' SONY Super HAD CCD Video Format NTSC or PAL Scanning System NTSC: 525 TV lines, 60 fields/s

- 31 - 9. CONTENT LIST 1. Camera Unit 2. Operation Instructions (this document) 3. RS485 Cable 4. ND Filter 5. External Light Sensor -ETHPES-01G

- 32 - EverFocus Electronics Corp. Head Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Hsi-Chih, Taip

- 3 - 1. PRODUCT OVERVIEW The new EQ550 Polestar is designed with advanced new generation 16-bit DSP which has powerful processing capability to show

- 4 - 2. NAMES AND FUNCTIONS OF PARTS 2.1 Front panel 2.2 Top/Bottom The bracket on the top side can be used for suspending the ca

- 5 - 2.3 Back panel connections (1) RS-485 port Connect to RS485 to get control by keyboard. Please refer to “6. Polestar wi

- 6 - (9) Audio Output Connector (for Audio model only) (10) Switch: For True Day/Night model with ICR (EQ550T) H: IR cut filter is removed when i

- 7 - 3. INSTALLATION 1. Remove the cover cap from the top of the lens mount. 2. If C mount lens is used, please add the C adaptor mount ring (the 5

- 8 - 4. CONNECTION 1. Connect the cable from keyboard’s RS485 port to camera’s RS485 port. 2. Connect the cable from video output jack